Filters
Close

Duct Fan Propelled Unijet Balsawood RC Airplane ARF Model

RC Plane Model E272XM, Unijet Balsa kit (with electric Motor) offers you a jet style flying experience and that too without any gas turbines.

SKU: 120203037
Availability: 2 in stock
Vendor: HobbyAndYou
₹ 18,172.00
13,051.00

RC Plane Model E272XM, Unijet Balsa kit (with electric Motor) offers you a jet style flying experience and that too without any gas turbines. High thrust-to-weight ratio and low wing loading add to its quality. The control over the jet airplane flying is commendable. Unijet is a very popular model for 3D acrobatic flying among experienced aero modelling hobbyists. The kit has rear mounted duct fan propeller for the a true jet flying experience. The model body is made with high quality balsawood with strong aeroply frame. The unit come partially assembled. You just need to connect servo wiring and fis wings, elevator and rudder and landing wheels.

This kit comes fitted with servos, motors and ESC in almost ready to fly condition. You will just require to mount the rudder and elveator, connect 11.1v Lipo battery and connect servo and BLDc motor controls to your radio receiver and you are ready to fly.

Please make sure to avoid flying in restricted areas like airports, railway stations and other sensitive protected areas. You should only fly your aero model in open fields with no buildings and people around. The best way to learn to fly an aero model is to find an experienced aero modeller in your area for overcoming initial flying troubles. We recommend that you should first get some flying training on simulators.

Features

  1. Represents the latest electric jet series
  2. Its unique features make it best evolutionary model from propeller flying to jet flying
  3. Full house controls with steering nose wheel
  4. Ultralite pilots installed

Specifications-

  • Wing Span- 920 mm
  • Fuselage Length- 830 mm
  • Flying Weight- 790 Gm fully Loaded
  • Motor-  Ducted fan propulsion BLDC 2831/2600 KV (Included)
  • ESC- 30A  (included)
  • Servos-  4 9g Servos (included)

Kit requires-

  1. 1 11.1V/25C/2200 Mah Battery
  2. 1 balancer Charger
  3. 1 4-9 Channel 2.4 Ghz radio transmitter/receiver

Please read the assembling and radio pairing instructions carefully.

Unijet Instruction Manual

RC Plane Model E272XM, Unijet Balsa kit (with electric Motor) offers you a jet style flying experience and that too without any gas turbines. High thrust-to-weight ratio and low wing loading add to its quality. The control over the jet airplane flying is commendable. Unijet is a very popular model for 3D acrobatic flying among experienced aero modelling hobbyists. The kit has rear mounted duct fan propeller for the a true jet flying experience. The model body is made with high quality balsawood with strong aeroply frame. The unit come partially assembled. You just need to connect servo wiring and fis wings, elevator and rudder and landing wheels.

This kit comes fitted with servos, motors and ESC in almost ready to fly condition. You will just require to mount the rudder and elveator, connect 11.1v Lipo battery and connect servo and BLDc motor controls to your radio receiver and you are ready to fly.

Please make sure to avoid flying in restricted areas like airports, railway stations and other sensitive protected areas. You should only fly your aero model in open fields with no buildings and people around. The best way to learn to fly an aero model is to find an experienced aero modeller in your area for overcoming initial flying troubles. We recommend that you should first get some flying training on simulators.

Features

  1. Represents the latest electric jet series
  2. Its unique features make it best evolutionary model from propeller flying to jet flying
  3. Full house controls with steering nose wheel
  4. Ultralite pilots installed

Specifications-

  • Wing Span- 920 mm
  • Fuselage Length- 830 mm
  • Flying Weight- 790 Gm fully Loaded
  • Motor-  Ducted fan propulsion BLDC 2831/2600 KV (Included)
  • ESC- 30A  (included)
  • Servos-  4 9g Servos (included)

Kit requires-

  1. 1 11.1V/25C/2200 Mah Battery
  2. 1 balancer Charger
  3. 1 4-9 Channel 2.4 Ghz radio transmitter/receiver

Please read the assembling and radio pairing instructions carefully.

Unijet Instruction Manual