Filters
Close

Multiplexer-Demultiplexer 4051 Logic Gate Electronic Component Set of 2 Pcs

A demultiplexer (or demux) is a device that takes a single input line and routes it to one of several digital output lines. The HCF4051 is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages

SKU: 81003
Vendor: HobbyAndYou
₹ 499.00
199.00

he HCF4051 is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages.The HCF4051 analog multiplexer/demultiplexer is a digitally controlled analog switch having low ON impedance and very low OFF leakage current.This multiplexer circuit dissipate extremely low quiescent power over the full VDD - VSS and VDD -VEE supply voltage range, independent of the logic state of the control signals.When a logic "1" is present at the inhibit input terminal all channel are off. This device is a single 8-channel multiplexer having three binary control inputs, A, B, and C, and an inhibit input.The three binary signals select 1 of 8 channels to be turned on, and connect one of the 8 inputs to the output.

  • Multiplexer Configuration 8:1; (2 Pcs)
  • On State Resistance Max 240ohm; Operating temperature -55 to 125 degree Celsius
  • Supply Voltage Range 3V to 20V
  • Analogue Multiplexer Case DIP; No. of Pins 16Pins

he HCF4051 is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages.The HCF4051 analog multiplexer/demultiplexer is a digitally controlled analog switch having low ON impedance and very low OFF leakage current.This multiplexer circuit dissipate extremely low quiescent power over the full VDD - VSS and VDD -VEE supply voltage range, independent of the logic state of the control signals.When a logic "1" is present at the inhibit input terminal all channel are off. This device is a single 8-channel multiplexer having three binary control inputs, A, B, and C, and an inhibit input.The three binary signals select 1 of 8 channels to be turned on, and connect one of the 8 inputs to the output.

  • Multiplexer Configuration 8:1; (2 Pcs)
  • On State Resistance Max 240ohm; Operating temperature -55 to 125 degree Celsius
  • Supply Voltage Range 3V to 20V
  • Analogue Multiplexer Case DIP; No. of Pins 16Pins