Filters
Close

Electronics L298 Motor Driver Module

L298 motor driver is ideal for robotic applications and well suited for connection to a micro-controller requiring just a couple of control lines per motor. It can also be interfaced with simple manual switches, TTL logic gates, relays, etc.

SKU: 81082
Vendor: HobbyAndYou
₹ 499.00
299.00

Drive a 2-phase bipolar stepper motor or two DC motors with the L298 dual H-Bridge chip, mounted on this handy breakout board along with all necessary peripherals! The L298 motor driver module features: • Finned Aluminum Heatsink for the L298 IC • Clamping Rectifiers • Filter Capacitors for logic-power and moto-power busses • Onboard 5-Volt DC Regulator (A jumper selects between external 5-Volt power or the onboard 5-volt regulator.) • Screw Terminal connections for ground, motor power, 5-volt power, and motor outputs • 0.1 inch-pitch header pins for logic inputs • Jumpers to tie the enable inputs to ground (if desired) • Switches up to 2 amps per channel The overall PC Board dimensions are 1.70" Square x 1.16" Tall. Mounting holes in each corner accept 1/8" screws or standoffs. This module is easy to get running, with only 4 logic pins required.

  • Drive a 2-phase bipolar stepper motor or two DC motors with the L298 dual H-Bridge chip, mounted on this handy breakout board along with all necessary peripherals!
  • It is ideal for robotic applications and well suited for connection to a microcontroller requiring just a couple of control lines per motor. It can also be interfaced with simple manual switches, TTL logic gates, relays, etc.
  • Driver Board Size: 55mm * 60mm * 30mm; Drive plate Weight: 33g
  • Other Extensions: control of direction indicators, the logic part of the plate to take power interface.
  • The logical part of the operating current range: 0 ~ 36mA; Storage temperature: -25 Deg C ~ +130 Deg C

Drive a 2-phase bipolar stepper motor or two DC motors with the L298 dual H-Bridge chip, mounted on this handy breakout board along with all necessary peripherals! The L298 motor driver module features: • Finned Aluminum Heatsink for the L298 IC • Clamping Rectifiers • Filter Capacitors for logic-power and moto-power busses • Onboard 5-Volt DC Regulator (A jumper selects between external 5-Volt power or the onboard 5-volt regulator.) • Screw Terminal connections for ground, motor power, 5-volt power, and motor outputs • 0.1 inch-pitch header pins for logic inputs • Jumpers to tie the enable inputs to ground (if desired) • Switches up to 2 amps per channel The overall PC Board dimensions are 1.70" Square x 1.16" Tall. Mounting holes in each corner accept 1/8" screws or standoffs. This module is easy to get running, with only 4 logic pins required.

  • Drive a 2-phase bipolar stepper motor or two DC motors with the L298 dual H-Bridge chip, mounted on this handy breakout board along with all necessary peripherals!
  • It is ideal for robotic applications and well suited for connection to a microcontroller requiring just a couple of control lines per motor. It can also be interfaced with simple manual switches, TTL logic gates, relays, etc.
  • Driver Board Size: 55mm * 60mm * 30mm; Drive plate Weight: 33g
  • Other Extensions: control of direction indicators, the logic part of the plate to take power interface.
  • The logical part of the operating current range: 0 ~ 36mA; Storage temperature: -25 Deg C ~ +130 Deg C
Product tags