Filters
Close

1-8S LiPo Battery Voltage Tester Low Volt Alarm Buzzer and LED


SKU: 81109
Delivery date: 1-2 days
Vendor: HobbyAndYou
₹ 499.00
299.00

Product description

1. Brand New & High Quality. 2. Use for 1-8s Lipl/Li-ion/LiMn/Li-Fe. Voltage detectior pricision: 0.01V. Unit voltage display range: 0.5V-4.5V. Total voltage display range: 0.5V-36V. 1S test mode voltage range: 3.7v-30v. Low voltage alarm mode for 2-8S. Alarm set value range: OFF-2.7V-3.7V. 3. When the voltage is below the set value,it will buzzer with red LED light,pre-set value 3.3V. 4. Push key which can change the voltage settings and save. 5. Size: 3.9cm x 2.4cm x 0.9cm. 6. For 1S-8S / Lipo / Li-ion / Li Mn / Li-Fe Battery.

  • LiPo Voltage Checker is used for detecting 1S-8S lithium/ LiPo/ LiMn/ LiFe batteries.
  • This LiPo Battery tester detects the voltage of each battery core automatically, support reverse connection protection.
  • To know the working state of your battery anytime, protect the battery from overcharge and over discharge.
  • The red LED will flash, the Lipo alarm buzzer will beep when the voltage is below the set point.
  • The factory default setting is 3.3V, press the button to change the voltage setting, and it will save your current setting automatically.

Product description

1. Brand New & High Quality. 2. Use for 1-8s Lipl/Li-ion/LiMn/Li-Fe. Voltage detectior pricision: 0.01V. Unit voltage display range: 0.5V-4.5V. Total voltage display range: 0.5V-36V. 1S test mode voltage range: 3.7v-30v. Low voltage alarm mode for 2-8S. Alarm set value range: OFF-2.7V-3.7V. 3. When the voltage is below the set value,it will buzzer with red LED light,pre-set value 3.3V. 4. Push key which can change the voltage settings and save. 5. Size: 3.9cm x 2.4cm x 0.9cm. 6. For 1S-8S / Lipo / Li-ion / Li Mn / Li-Fe Battery.

  • LiPo Voltage Checker is used for detecting 1S-8S lithium/ LiPo/ LiMn/ LiFe batteries.
  • This LiPo Battery tester detects the voltage of each battery core automatically, support reverse connection protection.
  • To know the working state of your battery anytime, protect the battery from overcharge and over discharge.
  • The red LED will flash, the Lipo alarm buzzer will beep when the voltage is below the set point.
  • The factory default setting is 3.3V, press the button to change the voltage setting, and it will save your current setting automatically.